* At least 32 MB memory,
64 MB recommended.
* At least one SCSI controller. It is recommended that you have a recorder
connected to a separate SCSI controller if you wish to use a recorder with
cdglow. For best results we recommend using Adaptec controllers (2940,
3940). There may be SCSI problems with IBM and Mylex RAID controllers on
Windows NT.
* 20 MB hard disk space for the software. The configurable directory cache size
depends on the number of disks and files on each disk. To evaluate disk space
requirements see "Setting up caches and buffers" on page 34.
* A hard disk buffer must be configured before using the incremental file
system. The buffer size required depends on the amount of data to be held in
the buffer.
* Sufficient free space for the database "volumes" in which
iXOS-JUKEMAN stores information about the disks. About 2 kB per licensed disk
will be needed.
* TCP/IP must be configured on the iXOS-JUKEMAN server (IP address etc.). The
protocol used for the network is irrelevant.